서동철
(DongChul Suh)
-
AI공과대학
화학공학과
- TEL : 041-540-5756
- EMAIL : dcsuh@hoseo.edu
학력
- 서울대학교 응용화학부 응용화학전공
(공학박사)
- 서울대학교 화학공학과 화학공학전공
(공학석사)
- 서울대학교 화학공학과 화학공학과
(공학사)
경력
-
서울대학교 (재)멀티스케일에너지시스템연구단
(
2014.01
~
2015.08
)
-
Australian National University Centre for Sustainable Energy System
(
2011.06
~
2013.12
)
-
삼성전자 광에너지사업팀
(
2009.07
~
2011.04
)
-
삼성종합기술원 광에너지그룹
(
2006.12
~
2009.07
)
-
삼성전자 메모리사업부 공정개발팀
(
2005.03
~
2006.11
)
- Reliability Research on the Quality of No-Gap Module Product
-
ENERGY SCIENCE & ENGINEERING,
14권,
1호,
pp.228-235,
2025.11
- Field performance analysis of solar cell designs
-
JOURNAL OF POWER SOURCES ADVANCES,
26권,
1호,
pp.100145-100145-5,
2024.03
- Determination of chlorine in Hf precursors measured by high-resolution inductively coupled plasma mass spectrometry
-
JOURNAL OF ANALYTICAL ATOMIC SPECTROMETRY,
38권,
9호,
pp.1808-1815,
2023.06
- Facile and precise quantitative determination of silicon in naphtha by inductively coupled plasma‑optical emission spectroscopy
-
Journal of Analytical Science and Technology,
13권,
1호,
pp.1-9,
2022.08
- Laponite-Mediated Copper Metallization by Palladium Intercalation
-
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY,
21권,
8호,
pp.4457-4461,
2021.08
- Status of Al2O3/TiO2-Based Antireflection and Surface Passivation for Silicon Solar Cell
-
PHYSICA STATUS SOLIDI-RAPID RESEARCH LETTERS,
0권,
0호,
pp.2100236-2100236,
2021.08
- Nanoscale Wrinkles on a Partially Cured Surface Using Polyurethane Acrylate Resins
-
POLYMER-KOREA,
43권,
6호,
pp.926-932,
2019.11
- Investigation of Copper Etching with a Ferric Nitrate Solution
-
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY,
19권,
10호,
pp.6347-6351,
2019.10
- Etch Characteristics and Morphology of Al2O3/TiO2 Stacks for Silicon Surface Passivation
-
Sustainability,
11권,
14호,
pp.3857-3857-12,
2019.07
- Impact of Buffer Layer Process and Na on Shunt Paths of Monolithic Series-connected CIGSSe Thin Film Solar Cells
-
SCIENTIFIC REPORTS,
9권,
1호,
pp.3666-3666-11,
2019.03
- Thermal stability of Al2O3/TiO2 stacks for boron emitter passivation on n-type silicon solar cells
-
THIN SOLID FILMS,
669권,
1호,
pp.60-64,
2019.01
- Influence of laser damage and contact geometry on the performance of passivated emitter and rear cell solar cells
-
THIN SOLID FILMS,
668권,
1호,
pp.45-49,
2018.12
- Minimizing Light-Induced Degradation of the Al2O3 Rear Passivation Layer for Highly Efficient PERC Solar Cells
-
ECS JOURNAL OF SOLID STATE SCIENCE AND TECHNOLOGY,
7권,
12호,
pp.Q253-Q258,
2018.12
- Cost-Performance Analysis for Interdigitated Back-Contact Solar Cells Using Ion Implantation Process
-
NANOSCIENCE AND NANOTECHNOLOGY LETTERS,
10권,
4호,
pp.548-553,
2018.04
- Photovoltaic Properties of Perovskite-Silicon Hybrid Solar Cells: A Strategy to Achieve Perovskite-Based Tandem Cells
-
NANOSCIENCE AND NANOTECHNOLOGY LETTERS,
10권,
4호,
pp.537-541,
2018.04
- Optimization of Controllable Factors in the Aluminum Silicon Eutectic Paste and Rear Silicon Nitride Mono-Passivation Layer of PERC Solar Cells
-
Metals and Materials International,
10.1007/s12540-018-0032-8권,
0호,
pp.1-8,
2018.03
- Efficient implementation of multiple drive-in steps in thermal diffusion of phosphorus for PERC solar cells
-
CURRENT APPLIED PHYSICS,
18권,
2호,
pp.178-182,
2018.02
- Gapless point back surface field for the counter doping of large-area interdigitated back contact solar cells using a blanket shadow mask implantation process
-
PROGRESS IN PHOTOVOLTAICS,
25권,
12호,
pp.989-995,
2017.11
- Facile and Thermally-Stable Al2O3 Passivation by Using In-Situ TiO2 as a Capping Layer for Boron Emitter of N-Type Silicon
-
JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY,
17권,
7호,
pp.5003-5007,
2017.07
- Continuously deposited anti-reflection double layer of silicon nitride and silicon oxynitride for selective emitter solar cells by PECVD
-
CURRENT APPLIED PHYSICS,
17권,
4호,
pp.517-521,
2017.01
- Electro-spray deposition of a mesoporous TiO2 charge collection layer: toward large scale and continuous production of high efficiency perovskite solar cells
-
Nanoscale,
7권,
48호,
pp.20725-20733,
2015.11
- Permeability- and Surface-Energy-Tunable Polyurethane Acrylate Molds for Capillary Force Lithography
-
ACS Applied Materials & Interfaces,
7권,
44호,
pp.23824-23830,
2015.11
- Capillary Force Lithography by Moduldus- and Permeability- Tunable Mold
-
Theories and Applications of Chemical Engineering,
21권,
2호,
pp.2012-2012,
2015.10
-
화공유체역학
(
2022.02
)
-
AL 공정분석 및 생산기술
(
2021.10
)
-
윌키스의 화학공학 유체역학
(
2020.03
)
-
고분자를 이용한 기능성 표면 제조와 응용
(
2018.08
)
-
실리콘 태양전지 - Selective Emitter Solar Cell
(
2015.07
)
-
실리콘 태양전지 - passivated emitter and rear locally diffused (PERL) cell
(
2015.07
)